Case study · Showroom display · San Francisco Bay Area · 2026

Creative screen design for a tech company’s showroom

Published

A technology company’s new showroom in the San Francisco Bay Area was built with a recess for a screen, along the main wall and around one corner. We designed one LED wall to fill it, running the length of the main wall and carrying on around the corner, and set it up so the staff run it from an iPad. Three days on site, from an empty wall to handover.

Finished: 8 m along the main wall, 1.5 m around the corner
Finished: 8 m along the main wall, 1.5 m around the corner
  • Before: the recess framed for the screen
  • Checking the recess with a laser level
  • Side-wall section going up first

At a glance

Client
A technology company (not named)
Place
Showroom, San Francisco Bay Area
On site
November 3–5, 2026
LED
Gloshine RA1.9, P1.9; 500 × 500 mm cabinets with four 250 mm front-service modules each
Size
Main wall 8 × 1.5 m (26.2 × 4.9 ft), 48 cabinets; side wall 1.5 × 1.5 m (4.9 × 4.9 ft), 9 cabinets
Control
NovaStar MX30 for both sections, Hirender S3 media server, iPad control on a dedicated Wi-Fi router
Sound
JBL amplifier, 8-inch ceiling speakers
Our scope
Screen design, supply, installation, programming and staff training; spare modules, receiving cards, power supplies and a module suction tool left on site

In November 2026 PixelPro Productions designed and installed a P1.9 LED wall in a technology company’s showroom in the San Francisco Bay Area. It has two sections that meet at a corner: 8 × 1.5 m (26.2 × 4.9 ft, 48 cabinets) on the main wall and 1.5 × 1.5 m (4.9 × 4.9 ft, 9 cabinets) on the side wall, set into a recess framed for the screen. One NovaStar MX30 runs both sections, so content can cross the corner as one picture. It plays from a Hirender S3 media server, and staff pick what plays from an iPad on a dedicated Wi-Fi router. We also supplied a JBL amplifier and 8-inch ceiling speakers, and trained the staff at handover. We worked for the client’s media agency.

Main wall and side wall sections at the corner
Main wall and side wall sections at the corner

The brief

The builders had framed a long recess across the main wall of the showroom and around one corner, for a display.

We were asked to design the screen to fill it, install it, and give the showroom staff a way to change the content without calling a technician.

Have a project in mind? Send us the details, or call.

How we built it 01

Laying out the screen

LED walls are built from whole cabinets, and these are 500 mm square. That gave 16 × 3 cabinets on the main wall and 3 × 3 on the side wall, filling the recess on both walls. At 1.9 mm pitch the picture stays sharp for visitors standing a few feet away.

Before anything went on the wall, we checked the recess with a laser level.

Before: the recess framed for the screen
Before: the recess framed for the screen
Checking the recess with a laser level
Checking the recess with a laser level

How we built it 02

One picture across two walls

We hung the side-wall section first, on the first afternoon, and worked along the main wall from the corner.

One NovaStar MX30 drives both sections, so a video can run across the corner as a single picture, or each wall can play its own content.

Side-wall section going up first
Side-wall section going up first
Main wall and side wall sections at the corner
Main wall and side wall sections at the corner

How we built it 03

Modules that come off the front

Each cabinet holds four 250 mm modules that mount from the front, so a module can be changed without reaching behind the wall. We powered the cabinets while the modules went on, which shows up a dead or off-color module straight away.

Spare modules and the suction tool for pulling one off the front stay in the showroom.

Main-wall cabinets up, modules not on yet
Main-wall cabinets up, modules not on yet
Installing modules from the front
Installing modules from the front

How we built it 04

Control and sound

A Hirender S3 media server feeds the MX30. Staff choose what plays from an iPad connected to a Wi-Fi router dedicated to the system.

Sound runs through a JBL amplifier to 8-inch ceiling speakers. We programmed the system and trained the staff before handover.

NovaStar MX30 processor
NovaStar MX30 processor
Hirender S3 server and the dedicated Wi-Fi router during setup
Hirender S3 server and the dedicated Wi-Fi router during setup

The result

  • Three days on site, from an empty recess to a working wall the showroom staff run themselves.

Other shapes and custom builds are on our creative LED displays page.

How we install permanent walls is on our LED video wall installation page.

Control and sound systems like this one are part of our AV system integration work.

Questions about showroom screens

Can an LED wall wrap around a corner?

Yes. In a tech company’s showroom in the San Francisco Bay Area, PixelPro built a P1.9 LED wall in two sections that meet at a corner, 8 × 1.5 m on the main wall and 1.5 × 1.5 m on the side wall. One NovaStar MX30 runs both, so content can cross the corner as one picture.

Can showroom staff change what is on the screen themselves?

Yes. In this Bay Area showroom, content plays from a Hirender S3 media server and staff pick it from an iPad on a dedicated Wi-Fi router. PixelPro set the system up and trained the staff at handover.

How long does a showroom LED wall take to install?

This one took three days on site in November 2026: 57 cabinets of P1.9 LED into a recess framed for the screen, plus a NovaStar MX30, a Hirender S3 media server, iPad control and ceiling speakers.

Text usGet a quote