Case study · Trade show · Las Vegas, NV · 2024–2025

Glasses-free 3D corner screens for Provenza Floors at TISE

Published

The Provenza Floors booth at TISE 2024 showed rooms, not just samples: four LED towers, one at each corner, each folding a picture round a 90° corner. From the aisle, the rooms seemed to stand inside the towers.

One of the four towers, January 2024: the client’s garden scene across the corner
One of the four towers, January 2024: the client’s garden scene across the corner
  • A living room across the corner
  • A kitchen island, the floor running back into the tower
  • A bathroom, the window on one face, the bath on the other

At a glance

Event
TISE 2024 (The International Surface Event), Mandalay Bay Convention Center, Las Vegas
Show days
January 24–26, 2024 (move-in from January 21)
Client
Provenza Floors
LED
Gloshine PL 2.6, 500 × 500 mm cabinets
Size
Four corner towers; each two faces of 1.5 × 4 m at 90°; 192 cabinets, 48 m²
Structure
Steel back frames with counterweights; the other two sides closed in wood, with a door
Playback
Hirender media servers; on-site control by our crew
Content
Glasses-free 3D video, supplied by the client
Also on the booth
The sound system
TISE 2025
January 28–30, 2025: a 6 × 3.5 m main wall with a 1.5 × 3.5 m wing each side, Gloshine PL 2.6, 126 cabinets; same scope

For TISE 2024 (The International Surface Event, January 24–26, 2024, Mandalay Bay Convention Center, Las Vegas), PixelPro Productions supplied and ran four glasses-free (naked-eye) 3D corner LED towers on the Provenza Floors booth, one at each corner. Each tower has two LED faces, 1.5 m wide and 4 m tall, meeting at 90°: Gloshine PL 2.6 in 500 mm cabinets, 48 a tower and 192 in all. Steel back frames with counterweights hold the towers up. The other two sides of each tower were closed in wood with a door, so the four towers were also the booth’s four storerooms. We supplied the LED, the back frames, the sound system and Hirender media servers, and ran playback and control on site; the 3D content was the client’s. Provenza Floors brought us back for TISE 2025 (January 28–30, 2025): one wall, a 6 × 3.5 m main screen with a 1.5 × 3.5 m wing on each side, again Gloshine PL 2.6.

The evening of January 22: a tower lit during the build, scaffold beside it
The evening of January 22: a tower lit during the build, scaffold beside it

The brief

A flooring brand sells how a floor looks in a room. On a trade show floor, a booth can show boards and samples; it cannot show the room.

Have a project in mind? Send us the details, or call.

Design 01

Two faces, one picture, at 90°

Corner 3D works because the picture is drawn for the corner. The client’s content is made to the size and angle of the two faces, so the fold disappears and the room seems to have depth.

The scenes are a living room, a kitchen, a bathroom, a pool and a garden. Seen from the corner, the floor of each runs back into the tower and the walls rise either side of the fold.

The corner is not a seam in the picture. It is what makes the picture.

A living room across the corner
A living room across the corner
A kitchen island, the floor running back into the tower
A kitchen island, the floor running back into the tower
A bathroom, the window on one face, the bath on the other
A bathroom, the window on one face, the bath on the other

Design 02

Four meters tall, standing on a booth

Each face is 3 cabinets wide and 8 high: 24 a face, 48 a tower.

The towers stand on steel back frames with counterweights. We moved in from January 21, and the first tower was showing content on the evening of January 22, two days before the show opened.

The evening of January 22: a tower lit during the build, scaffold beside it
The evening of January 22: a tower lit during the build, scaffold beside it
From behind, at strike: two faces of cabinets on the steel back frame
From behind, at strike: two faces of cabinets on the steel back frame

Design 03

Inside each tower, a storeroom

Only two sides of each tower face the aisle. The other two were closed in wood, with a door, so each tower is hollow and can be walked into.

Four screens and four storerooms, in the same footprint.

A whole tower on its plinth, on the pool scene
A whole tower on its plinth, on the pool scene
A tower over the aisle during the show
A tower over the aisle during the show

Design 04

Played and run through the show

The 3D content played from Hirender media servers, and our crew ran playback and control on site for the three show days. The booth’s sound system was ours too.

The water scene, from across the aisle
The water scene, from across the aisle
The Provenza Floors booth during the show
The Provenza Floors booth during the show

Design 05

Back a year later: TISE 2025

Provenza Floors brought us back for TISE 2025, again at Mandalay Bay. This time the booth had one wall, a main screen with a wing on each side, and our part was the same as in 2024: the LED and its back frame, the sound system, the playback servers and control on site.

January 28, 2025, opening day: the Provenza Floors booth
January 28, 2025, opening day: the Provenza Floors booth
Opening day: LED lit behind the Provenza Floors desk
Opening day: LED lit behind the Provenza Floors desk
January 26, 2025: the main wall and its wings from behind, during the build
January 26, 2025: the main wall and its wings from behind, during the build

The result

  • The towers ran the client’s 3D to the end of the show, and Provenza Floors asked us back the next year.

How we run LED, sound and crew for events is on our event AV production page.

Folded, corner and sphere screens are on our custom-shape LED page.

Questions exhibitors ask

What is a corner LED screen for glasses-free 3D?

Two LED faces meeting at an angle, usually 90°, playing video drawn for that corner so the picture seems to have depth. At TISE 2024 in Las Vegas, PixelPro Productions built four of them on the Provenza Floors booth: each two faces of 1.5 × 4 m at 90°, Gloshine PL 2.6, playing the client’s 3D rooms.

How many LED cabinets is a 4 m corner tower?

With 500 × 500 mm cabinets, a face 1.5 m wide and 4 m tall is 3 × 8 = 24 cabinets, and a two-faced corner tower is 48. The four towers PixelPro built for the Provenza Floors booth at TISE 2024 used 192 Gloshine PL 2.6 cabinets, 48 m² of LED.

Can a booth’s LED tower also be used for storage?

Yes. A corner tower only needs LED on the two sides facing the aisle. At TISE 2024 PixelPro closed the other two sides of each tower in wood with a door, so the Provenza Floors booth’s four LED towers were also its four storerooms.

How does a tall LED tower stand on a trade show booth?

On a steel back frame with counterweights. At TISE 2024, Mandalay Bay, PixelPro stood four 4 m corner towers of Gloshine PL 2.6 on steel back frames with counterweights, moving in three days before the show and lighting the first tower two days before it opened.

We design and install LED walls like this across Southern California: structure, power and control, from one licensed contractor. LED video wall design and installation →

Text usGet a quote